Isothermal cargo covers

Thermal cargo covers for containers which protect our customers' products and goods from temperature changes without needing to use specialist containers, keeping the cargo at the right temperature.
    • EMBATUFF
       

    EMBATUFF

    Standard isothermal cargo covers that safeguard from changes in temperature, protecting against heat from radiation (through the wall of the container) and convection (hot air circulating inside the container).

    Uses:
    Powders, pellets, cosmetics, chemical products, pharmaceutical products, bulk goods, foodstuffs, polymers, resins, hot fill products, adhesives, wine and distilled drinks, etc.

    Characteristics:
    • Aluminium foil
    • Polyester weave
    • Kits for 20’ and 40’ boxes
    • 20’, 40’ and HC containers
    • With and without base.
    • Assembled using telescopic rods (fast, 5-minute assembly by a single person).


    Benefits:
    • They prevent damage to goods, saving on costs.
    • Made to measure.
    • They protect against humidity, oxygen and light.
    • EMBATUFF LOWCOST
       

    EMBATUFF LOW COST

    Standard isothermal cargo covers that safeguard from changes in temperature, protecting against heat from radiation (through the wall of the container) and convection (hot air circulating inside the container). Low cost system using border tape and four straps (two at the front).

    Uses:
    Powders, pellets, cosmetics, chemical products, pharmaceutical products, bulk goods, foodstuffs, polymers, resins, hot fill products, adhesives, wine and distilled drinks, etc.

    Characteristics:
    • Aluminium foil.
    • Polyester weave.
    • Kits 20’ and 40’ boxes.
    • 20’, 40’ and HC containers.
    • With and without base.
    • Assembled with fastening clips.

    Benefits:
    • They prevent damage to goods, saving on costs.
    • Made to measure.
    • They protect against humidity, oxygen and light.
    • EMBAPANEL
       

    EMBAPANEL

    Thermal insulation system using ridged plates inside containers for exporting foodstuffs and chemical products which are sensitive to sudden changes in temperature.

    Uses:
    Pharmaceuticals, cosmetics, wine and spirits, juices, foodstuffs, chemical products, etc.

    Characteristics:
    • Rated thickness: 40 mm
    • Rated density: 35 Kg/m³
    • Product colour: Orange
    • Water resistance: Total/resistant product
    • Plate measurements: 2300x600x40 mm

    Benefits:
    • Temperature control for shipments.
    • Easy to put on.
    • Low-cost option, reduce costs.
    • EMBATERM
       

    EMBATERM

    Rolls of isothermal covers for standard 20' and 40' containers. Thermal blanket.
    These covers insulate the container from external temperature changes. They are made from two outer layers of aluminium and a layer of low-density, 31.5-mm diameter polyethylene bubble wrap.

    Uses: powders, pellets, chemical products, pharmaceutical products, foodstuffs, polymers, resins, adhesives, etc.

    Characteristics:
    • Weight 212 g/m³.
    • Being so thin, they do not reduce container capacity.
    • Easy to put on and take off
    Benefits:
    • They prevent damage to goods
    • Made to measure
    • They protect against humidity, oxygen and light
    • Embacover_01
       

    EMBACOVER

    Isothermal covers that protect pallet-stacked products from external temperature changes.

    Uses:
    Pallet-stacked products such as foodstuffs, chemical products, pharmaceuticals, cosmetics, wine, oil, etc.

    Characteristics:
    • Logistics and traceability (pharmaceuticals, foodstuffs, drinks).
    • Temperature control for shipments.
    • Single-use cover.
    • Easy to put on.
    • Low cost.
    • They guarantee a stable temperature curve.
    • They protect against external climate effects.
    • Suitable for use with foodstuffs.
    Benefits:
    • Temperature control for shipments.
    • Single-use cover.
    • Easy to put on.
    • Low cost/ Reduce costs.
    • air embacover
       

    AIR EMBACOVER

    Air-Embacover is a system that protects cargo in air freight containers against sudden changes in temperature and the effects of humidity. It can be installed with ease in 5 minutes. It is especially useful for protecting products that are sensitive to changes in temperature.

    Uses:
    Ait freight containers (AKE TYPE - AFF TYPE - APP TYPE).

    Characteristics:
    • Aluminium foil.
    • Polyester weave.
    Benefits:
    • Temperature control for shipments.
    • Low cost (cost reduction).
    • Easy installation.
Contact us
Download the service catalogue
News
Presentation of our new VGM measurement system in SIL 2017
SIL 2017
On June 6th, 7th and 8th, the International Logistics and Maintenance Fair (SIL) 2017 will be held in Barcelona. Once again, at Grupo Embalex, we will be present at the show to bring our innovations to the sector.

In particular, this year we will introduce our new VGM measurement system, which allows weighing any type of cargo and extracting the Verified Gross Weight (VGM) label attached to the container. This process, together with the packaging and the rest of logistics stages is carried out at the same point, which is why it optimizes processes reducing costs and dead times.
In addition to Embalex, the rest of the group's companies, C&S Packaging Supplier, will also participate in the fair with the Embatuff isothermal insulation, which has become a reference product throughout Europe; Gesica, which continues to grow with its services for the logistic sector of trincaje of goods and loads; Or Noray Containers Services, which has established itself as a leader in the rental and sale of both maritime and land-based containers.
You can visit us at our stand D414.
EMBALEX, S.L.U. | B58108101
C/Empordà, 4. Pol. Ind. Can Bernades - Subirà  08130 - Santa Perpètua de Mogoda (Barcelona)
Tel. 93 864 01 70 | Fax. 93 864 98 13 | info@embalex.com | www.embalex.com
Our website uses its own cookies and third-party cookies. Please read and accept our cookie policy to enjoy all the best features of our website.